diff options
Diffstat (limited to 'Completion/Unix/Command/_systemd')
| -rw-r--r-- | Completion/Unix/Command/_systemd | 470 |
1 files changed, 0 insertions, 470 deletions
diff --git a/Completion/Unix/Command/_systemd b/Completion/Unix/Command/_systemd deleted file mode 100644 index 028ecddd9..000000000 --- a/Completion/Unix/Command/_systemd +++ /dev/null @@ -1,470 +0,0 @@ -#compdef systemctl systemd-loginctl - -# Copyright (c) 2011 Foudil Bre'tel <foudil.newbie+zshsystemctl@gmail.com> -# -# This file is released under the GPLv3. -# -# inspired from _yum and systemctl-bash-completion.sh (shipped with systemctl) -# -# TODO: enable options after commands. Ex: systemctl list-units --all --full - -# Main dispatcher -_systemd() -{ - local curcontext="$curcontext" state lstate line - - case "$service" in - systemctl) - # -s for aggregated options like -aP - _arguments -s \ - {-h,--help}'[Show help]' \ - '--version[Show package version]' \ - {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \ - \*{-p,--property=}'[Show only properties by specific name]:unit property:()' \ - {-a,--all}'[Show all units/properties, including dead/empty ones]' \ - '--failed[Show only failed units]' \ - "--full[Don't ellipsize unit names on output]" \ - '--fail[When queueing a new job, fail if conflicting jobs are pending]' \ - '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \ - '--kill-mode=[How to send signal]:killmode:(control-group process)' \ - '--kill-who=[Who to send signal to]:killwho:(main control all)' \ - {-s,--signal=}'[Which signal to send]:signal:_signals' \ - {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ - {-P,--privileged}'[Acquire privileges before execution]' \ - {-q,--quiet}'[Suppress output]' \ - '--no-block[Do not wait until operation finished]' \ - "--no-wall[Don't send wall message before halt/power-off/reboot]" \ - "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \ - '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \ - '--no-pager[Do not pipe output into a pager]' \ - '--no-ask-password[Do not ask for system passwords]' \ - '--order[When generating graph for dot, show only order]' \ - '--require[When generating graph for dot, show only requirement]' \ - '--system[Connect to system manager]' \ - '--user[Connect to user service manager]' \ - '--global[Enable/disable unit files globally]' \ - {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \ - '--root=[Enable unit files in the specified root directory]:directory:_directories' \ - '--runtime[Enable unit files only temporarily until next reboot]' \ - '*::systemctl command:_systemctl_command' - ;; - - systemd-loginctl) - _arguments -s \ - {-h,--help}'[Show help]' \ - '--version[Show package version]' \ - \*{-p,--property=}'[Show only properties by this name]:unit property:' \ - {-a,--all}'[Show all properties, including empty ones]' \ - '--failed[Show only failed units]' \ - '--kill-who=[Who to send signal to]:killwho:(main control all)' \ - {-s,--signal=}'[Which signal to send]:signal:_signals' \ - {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ - {-P,--privileged}'[Acquire privileges before execution]' \ - '--no-pager[Do not pipe output into a pager]' \ - '*::systemd-loginctl command:_systemd_loginctl_command' - ;; - - *) _message 'eh?' ;; - esac - -} - -_hosts_or_user_at_host() -{ - _alternative \ - 'users-hosts:: _user_at_host' \ - 'hosts:: _hosts' -} - -(( $+functions[_systemctl_command] )) || _systemctl_command() -{ - local -a _systemctl_cmds - _systemctl_cmds=( - "list-units:List units" - "start:Start (activate) one or more units" - "stop:Stop (deactivate) one or more units" - "reload:Reload one or more units" - "restart:Start or restart one or more units" - "condrestart:Restart one or more units if active" - "try-restart:Restart one or more units if active" - "reload-or-restart:Reload one or more units is possible, otherwise start or restart" - "force-reload:Reload one or more units is possible, otherwise restart if active" - "reload-or-try-restart:Reload one or more units is possible, otherwise restart if active" - "isolate:Start one unit and stop all others" - "kill:Send signal to processes of a unit" - "is-active:Check whether units are active" - "status:Show runtime status of one or more units" - "show:Show properties of one or more units/jobs or the manager" - "reset-failed:Reset failed state for all, one, or more units" - "load:Load one or more units" - "list-unit-files:List installed unit files" - "enable:Enable one or more unit files" - "disable:Disable one or more unit files" - "reenable:Reenable one or more unit files" - "preset:Enable/disable one or more unit files based on preset configuration" - "mask:Mask one or more units" - "unmask:Unmask one or more units" - "link:Link one or more units files into the search path" - "is-enabled:Check whether unit files are enabled" - "list-jobs:List jobs" - "cancel:Cancel all, one, or more jobs" - "dump:Dump server status" - "dot:Dump dependency graph for dot(1)" - "snapshot:Create a snapshot" - "delete:Remove one or more snapshots" - "show-environment:Dump environment" - "set-environment:Set one or more environment variables" - "unset-environment:Unset one or more environment variables" - "daemon-reload:Reload systemd manager configuration" - "daemon-reexec:Reexecute systemd manager" - "default:Enter system default mode" - "rescue:Enter system rescue mode" - "emergency:Enter system emergency mode" - "halt:Shut down and halt the system" - "poweroff:Shut down and power-off the system" - "reboot:Shut down and reboot the system" - "kexec:Shut down and reboot the system with kexec" - "exit:Ask for user instance termination" - "switch-root:Change to a different root file system" - "suspend:Suspend the system" - "hibernate:Hibernate the system" - "hibernate-sleep:Hibernate and suspend the system" - ) - - if (( CURRENT == 1 )); then - _describe -t commands 'systemctl command' _systemctl_cmds - else - local curcontext="$curcontext" ret - - cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}" - # Deal with any aliases - case $cmd in - condrestart) cmd="try-restart";; - force-reload) cmd="reload-or-try-restart";; - esac - - if (( $#cmd )); then - curcontext="${curcontext%:*:*}:systemctl-${cmd}:" - - local update_policy - zstyle -s ":completion:${curcontext}:" cache-policy update_policy - if [[ -z "$update_policy" ]]; then - zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy - fi - - _call_function ret _systemctl_$cmd || _message 'no more arguments' - else - _message "unknown systemctl command: $words[1]" - fi - return ret - fi -} - -__systemctl() -{ - systemctl --full --no-legend --no-pager "$@" -} - - -# Fills the unit list -_systemctl_all_units() -{ - if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) && - ! _retrieve_cache SYS_ALL_UNITS; - then - _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo "$a"; done; }) ) - _store_cache SYS_ALL_UNITS _sys_all_units - fi -} - -# Fills the unit list including all file units -_systemctl_really_all_units() -{ - local -a all_unit_files; - local -a really_all_units; - if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) && - ! _retrieve_cache SYS_REALLY_ALL_UNITS; - then - all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo "$a"; done; }) ) - _systemctl_all_units - really_all_units=($_sys_all_units $all_unit_files) - _sys_really_all_units=(${(u)really_all_units}) - _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units - fi -} - -_filter_units_by_property() { - local property=$1 value=$2 ; shift ; shift - local -a units ; units=($*) - local prop unit - for ((i=1; $i <= ${#units[*]}; i++)); do - # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for - # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to - # revert to calling 'systemctl show' once for all units, which is way - # faster - unit=${units[i]} - prop=$(systemctl show --no-pager --property="$property" ${unit} 2>/dev/null) - if [[ "${prop}" = "$property=$value" ]]; then - echo "${unit}" - fi - done -} - -_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo "$a"; done; }) )} -_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" ]] && echo "$a"; done; }) )} -_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo "$a"; done; }) )} -_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo "$a"; done; }) )} -_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo "$a"; done; }) )} -_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo "$a"; done; }) )} - -# Completion functions for ALL_UNITS -for fun in is-active is-enabled status show mask preset ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_really_all_units - compadd "$@" -a - _sys_really_all_units - } -done - -# Completion functions for ENABLED_UNITS -for fun in disable reenable ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_enabled_units - compadd "$@" -a - _sys_enabled_units - } -done - -# Completion functions for DISABLED_UNITS -(( $+functions[_systemctl_enable] )) || _systemctl_enable() -{ - _systemctl_disabled_units - compadd "$@" -a - _sys_disabled_units -} - -# Completion functions for FAILED_UNITS -(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed() -{ - _systemctl_failed_units - compadd "$@" -a - _sys_failed_units || _message "no failed unit found" -} - -# Completion functions for STARTABLE_UNITS -(( $+functions[_systemctl_start] )) || _systemctl_start() -{ - _systemctl_inactive_units - compadd "$@" -a - _sys_inactive_units -} - -# Completion functions for STOPPABLE_UNITS -for fun in stop kill try-restart condrestart ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_active_units - compadd "$@" - $( _filter_units_by_property CanStop yes \ - ${_sys_active_units[*]} ) - } -done - -# Completion functions for ISOLATABLE_UNITS -(( $+functions[_systemctl_isolate] )) || _systemctl_isolate() -{ - _systemctl_all_units - compadd "$@" - $( _filter_units_by_property AllowIsolate yes \ - ${_sys_all_units[*]} ) -} - -# Completion functions for RELOADABLE_UNITS -for fun in reload reload-or-try-restart force-reload ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_active_units - compadd "$@" - $( _filter_units_by_property CanReload yes \ - ${_sys_active_units[*]} ) - } -done - -# Completion functions for RESTARTABLE_UNITS -for fun in restart reload-or-restart ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_all_units - compadd "$@" - $( _filter_units_by_property CanStart yes \ - ${_sys_all_units[*]} | while read line; do \ - [[ "$line" =~ \.(device|snapshot|socket|timer)$ ]] || echo "$line"; \ - done ) - } -done - -# Completion functions for MASKED_UNITS -(( $+functions[_systemctl_unmask] )) || _systemctl_unmask() -{ - _systemctl_masked_units - compadd "$@" -a - _sys_masked_units || _message "no masked unit found" -} - -# Completion functions for JOBS -(( $+functions[_systemctl_cancel] )) || _systemctl_cancel() -{ - compadd "$@" - $(__systemctl list-jobs \ - | cut -d' ' -f1 2>/dev/null ) || _message "no job found" -} - -# Completion functions for SNAPSHOTS -(( $+functions[_systemctl_delete] )) || _systemctl_delete() -{ - compadd "$@" - $(__systemctl list-units --type snapshot --all \ - | cut -d' ' -f1 2>/dev/null ) || _message "no snampshot found" -} - -# Completion functions for ENVS -for fun in set-environment unset-environment ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - local fun=$0 ; fun=${fun##_systemctl_} - local suf - if [[ "${fun}" = "set-environment" ]]; then - suf='-S=' - fi - - compadd "$@" ${suf} - $(systemctl show-environment \ - | while read line; do echo "${line%%\=}";done ) - } -done - -(( $+functions[_systemctl_link] )) || _systemctl_link() { _files } - -(( $+functions[_systemctl_switch-root] )) || _systemctl_switch-root() -{ - if (( CURRENT == 2 )); then - _directories - fi -} - -# no systemctl completion for: -# [STANDALONE]='daemon-reexec daemon-reload default dot dump -# emergency exit halt kexec list-jobs list-units -# list-unit-files poweroff reboot rescue show-environment' -# [NAME]='snapshot load' - -_systemctl_caching_policy() -{ - local _sysunits - local -a oldcache - - # rebuild if cache is more than a day old - oldcache=( "$1"(mh+1) ) - (( $#oldcache )) && return 0 - - _sysunits=($(__systemctl --all | cut -d' ' -f1)) - - if (( $#_sysunits )); then - for unit in $_sysunits; do - [[ "$unit" -nt "$1" ]] && return 0 - done - fi - - return 1 -} - - - -_systemd_loginctl_all_sessions(){_sys_all_sessions=($(systemd-loginctl list-sessions | { while read a b; do echo "$a"; done; }) )} -_systemd_loginctl_all_users() {_sys_all_users=( $(systemd-loginctl list-users | { while read a b; do echo "$a"; done; }) )} -_systemd_loginctl_all_seats() {_sys_all_seats=( $(systemd-loginctl list-seats | { while read a b; do echo "$a"; done; }) )} - -# Completion functions for SESSIONS -for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do - (( $+functions[_systemd_loginctl_$fun] )) || _systemd_loginctl_$fun() - { - _systemd_loginctl_all_sessions - compadd "$@" -a - _sys_all_sessions - } -done - -# Completion functions for USERS -for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do - (( $+functions[_systemd_loginctl_$fun] )) || _systemd_loginctl_$fun() - { - _systemd_loginctl_all_users - compadd "$@" -a - _sys_all_users - } -done - -# Completion functions for SEATS -(( $+functions[_systemd_loginctl_seats] )) || _systemd_loginctl_seats() -{ - _systemd_loginctl_all_seats - compadd "$@" -a - _sys_all_seats -} -for fun in seat-status show-seat terminate-seat ; do - (( $+functions[_systemd_loginctl_$fun] )) || _systemd_loginctl_$fun() - { _systemd_loginctl_seats } -done - -# Completion functions for ATTACH -(( $+functions[_systemd_loginctl_attach] )) || _systemd_loginctl_attach() -{ - _systemd_loginctl_all_seats - - _arguments -w -C -S -s \ - ':seat:_systemd_loginctl_seats' \ - '*:device:_files' -} - -# no systemd-loginctl completion for: -# [STANDALONE]='list-sessions list-users list-seats flush-devices' - -(( $+functions[_systemd_loginctl_command] )) || _systemd_loginctl_command() -{ - local -a _systemd_loginctl_cmds - _systemd_loginctl_cmds=( - "list-sessions:List sessions" - "session-status:Show session status" - "show-session:Show properties of one or more sessions" - "activate:Activate a session" - "lock-session:Screen lock one or more sessions" - "unlock-session:Screen unlock one or more sessions" - "terminate-session:Terminate one or more sessions" - "kill-session:Send signal to processes of a session" - "list-users:List users" - "user-status:Show user status" - "show-user:Show properties of one or more users" - "enable-linger:Enable linger state of one or more users" - "disable-linger:Disable linger state of one or more users" - "terminate-user:Terminate all sessions of one or more users" - "kill-user:Send signal to processes of a user" - "list-seats:List seats" - "seat-status:Show seat status" - "show-seat:Show properties of one or more seats" - "attach:Attach one or more devices to a seat" - "flush-devices:Flush all device associations" - "terminate-seat:Terminate all sessions on one or more seats" - ) - - if (( CURRENT == 1 )); then - _describe -t commands 'systemd-loginctl command' _systemd_loginctl_cmds || compadd "$@" - else - local curcontext="$curcontext" - - cmd="${${_systemd_loginctl_cmds[(r)$words[1]:*]%%:*}}" - - if (( $#cmd )); then - curcontext="${curcontext%:*:*}:systemd_loginctl-${cmd}:" - - _call_function ret _systemd_loginctl_$cmd || _message 'no more arguments' - else - _message "unknown systemd-loginctl command: $words[1]" - fi - return ret - fi -} - -_systemd "$@" - -# Local Variables: -# mode: sh -# sh-indentation: 2 -# indent-tabs-mode: nil -# sh-basic-offset: 2 -# End: |